Agitation |
Drive |
DC motor, AC Gear motor Top drive motor (mechanical drive) |
Range |
50~550 rpm 1 rpm |
Sensor |
Magnetic Hall sensor |
Impellers |
Turbine impeller (SUS 316L) Foam breaker (SUS 316L) |
Control |
Microprocessor based PID |
Temperature |
Range( ) |
From 3 above the cooling water temperature to 80 (accuracy 0.1 ) |
Control |
The temperature is automatically controlled by the external heat exchanger system. |
Sensor |
RTD(Pt-100) |
Aeration |
Sparger |
Ring sparger (SUS 316L) |
Inlet filter |
The cartridge type sterilizable pleated type 0.2μm absolute filter is applied. |
Outer filter |
The same as inlet filter specification.(optional item) |
Control range |
Different vessel size and/or ordered specifications. |
Materials & Finish |
Vessel |
Using 316L stainless steel it is polished mechanically and/or electrically. |
Piping |
316L stainless steel prevents contamination and is polished by electrically. |
O-rings/gaskets |
Viton or silicone material is used for the O-ring and the EPDM is used for the gasket. |
Control Unit |
Panel |
8.5" Graphic Color LCD, membrane keypad |
Communications |
Memory stick, printer, computer with the RS-232C communication protocol |
Controller board |
Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system |
Pressure control |
The pressure is controlled manually and/or automatically |
Power supply |
220V 50/60Hz single phase, 380V 50/60Hz three phase |